Tag Archives: Amalgam Separator Maintenance

M.A.R.S has Taken Over the Greater New York Dental Meeting – The End – Part 2

On Wednesday, the last day of the Greater New York Dental Meeting, we released a blog highlighting our Trusted Distributors and the fun time M.A.R.S and LB1 had with them. Today will be promoting our Show Special and highlighting Dr. Kopyoff, the winner of our LINZ 3 Pack evacuation line cleaner. Show Special There was […]

M.A.R.S has Taken Over the Greater New York Dental Meeting – The End – Part 1

M.A.R.S Bio-Med and LB1 had a great time at the Greater New York Dental Meeting. A common theme across the Dental Professionals in New York, they are tired of the expensive filter based amalgam separators. The M.A.R.S LibertyBOSS was a light to those who wanted a no maintenance, low cost, high valued system for their Dental […]

M.A.R.S Invades the Greater New York Dental Meeting – Part 2

  Show Special M.A.R.S and our Trusted Distributors know that amalgam separators have been a requirement in New York and New Jersey for a number of years now. The issue with the current compliance, due to misinformation and lack of education on the required maintenance of the typical amalgam separator, most Dental Practices are either; […]

Greater New York Dental Meeting

M.A.R.S Invades the Greater New York Dental Meeting – Part 1

M.A.R.S is proud to be joining the 2018 Greater New York Dental Meeting at the Jacob K. Javits Convention Center on November 25th-28th. Those of you who have read our recent blogs, you will know that M.A.R.S and our Trusted Distributors will be proudly providing information on our newly reformulated CleanLINZ and the M.A.R.S Upgrade […]

M.A.R.S Answers the Question “What is an Amalgam Separator?” – Part 2

The new EPA Regulation has many Dental Professionals puzzled, and looking for more answers on their compliance. M.A.R.S has released many blogs in the past regarding the EPA Regulation, who will be regulating Dental Practices, and how to maintain amalgam separators. What M.A.R.S has not done yet, was a blog to explain what an amalgam […]

M.A.R.S Education Courses; EPA Regulation, EPA Compliance, Infection Control and Preventative Maintenance with the Use of Evacuation Line Cleaners

M.A.R.S Bio-Med is known in the Dental and Pretreatment Industries as experts in amalgam separation, EPA Regulation, EPA compliance, and infection control with the use of evacuation line cleaners. If you are a Dental Society, Study Group, Dental Convention, Dental Supply or Service Company, Water Treatment Plant or regulating body in Canada or the United […]

M.A.R.S Presents the New and Improved CleanLINZ Evacuation Line Cleaner

M.A.R.S is proud to announce we have reformulated our CleanLINZ Evacuation Line Cleaner to quadruple the number of bacterial colonies per CFU to 1 billion! After weeks of testing, we have determined that our new solution has outperformed our old formula by a large margin. For those of you who are familiar with the M.A.R.S […]

Fifteen Minute Upgrade to the M.A.R.S LibertyBOSS Amalgam Separator

Today, we will be reviewing the installation of a LibertyBOSS using the Wet Upgrade Kit from M.A.R.S Bio-Med. The M.A.R.S Upgrade Kit supplies everything needed for a Dental Practice to upgrade their office to a LibertyBOSS.   The M.A.R.S Upgrade Kits were created to provide everyone access to the NO maintenance, NO Inspection, NO filter, […]

Amalgam Separator User Manual Breakdown R&D Amalgam Collector: Part 2 Maintenance and Disposal

The blog series on the user manuals of the top six amalgam separators in North America, as being the longest in M.A.R.S history. We have completed a total of eighteen blogs, including this one, providing simple explanations and highlighting important information in the user manuals of amalgam separators. Our end note is the maintenance and […]

Amalgam Separator User Manual Breakdown R&D Amalgam Collector: Part 1 Installation and General Operation

Today we begin the user manual breakdown of the last amalgam separator on our list, the R&D Amalgam Collector. R&D is an amalgam separator manufacturer out of Seattle, created by Dr. Ross Fraker and Deanna Borden in the mid-90s. Currently, R&D has three models of amalgam separators to accommodate different sized Dental Practices. Thank you […]

Amalgam Separator User Manual Breakdown: Air Techniques Acadia – Part 6 Disposal

We have nearly reached the end of the segment on the Air Techniques Acadia amalgam separator. So far we have reviewed the Pre-Installation, Assembly, Installation, Inspection, Troubleshooting and the Maintenance of this unit. The proper handling and disposal procedures of the Air Techniques is the last to be reviewed. For those of you following this […]

Amalgam Separator User Manual Breakdown: Air Techniques Acadia – Part 5 Maintenance

We have nearly reached the end of the segment on the Air Techniques Acadia amalgam separator. So far we have reviewed the Pre-Installation, Assembly, Installation, Inspection, and Troubleshooting of this unit. What is left to review on the Acadia are the maintenance and recycling procedures of the filter and the entire unit. For those of […]

Amalgam Separator User Manual Breakdown Air Techniques Acadia: Part 3 Inspection

Welcome back on this journey to learning how to read the User Manuals of the top six amalgam separators sold in North America. Our first segment started with the amalgam separator that requires the least amount of work, maintenance or inspection, the M.A.R.S LibertyBOSS. Before we took some time off this blog series to write […]

Amalgam Separator User Manual Breakdown Air Techniques Acadia: Part 2 Installation

Today we will be continuing the installation segment for the Air Techniques Acadia brand of amalgam separators. Part 1 of this blog highlighted the recommendations for the pre-installation and assembly of their Acadia amalgam separator. Thank you for following us on this journey to learning how to read the User Manuals of the top six […]

Amalgam Separator User Manual Breakdown Air Techniques Acadia: Part 1 Pre-Installation

Today we will be reviewing the Air Techniques Acadia, an amalgam separator that was created by one of the largest manufacturers of mechanical room equipment. Though this system is due to be replaced by its predecessor “Acadia Plus,” constant delays in its released still leaves their current model as the Acadia. Thank you for following us […]

Amalgam Separator User Manual Breakdown: Metasys Eco II – Part 2 Inspection, Maintenance, and Disposal

Today we will be continuing part two of the Metasys brand of amalgam separators. Part 1 of this blog highlighted the recommendations for the installation of the Eco II system. Thank you for following us on this journey to learning how to read the User Manuals of the top six amalgam separators sold in North […]

Amalgam Separator User Manual Breakdown: Metasys Eco II – Part 1 Installation

Today we will be reviewing a European amalgam separator out of Austria, the Metasys Eco II, and Eco II Tandem. Thank you for following us on this journey to learning how to read the User Manuals of the top six amalgam separators sold in North America. Our last segment started with the amalgam separator that […]

SolmeteX

Amalgam Separator User Manual Breakdown: Crosstex Syclone – Part 3 Maintenance, Disposal, and Notes

We will be continuing part three of the Crosstex Syclone amalgam separators. Part 1 of this blog highlighted the recommendations for the installation of the many different private labels of the Crosstex Syclone amalgam separators on the market. Part 2 explained the required WEEKLY inspection and troubleshooting suggestions from Crosstex on their brand of amalgam […]

Amalgam Separator User Manual Breakdown: Crosstex Syclone – Part 1 Installation

Today’s blog will be reviewing the user manual for the Crosstex Syclone, with a focus on the installation. Thank you for following us on this journey to learning how to read the User Manuals of the top six amalgam separators sold in North America. Our first segment started with the amalgam separator that requires the least […]

Amalgam Separator User Manual Breakdown: SolmeteX Hg5® – Part 2 Inspection and Troubleshooting

Today we will be continuing part two of the SolmeteX brand of amalgam separators. Part 1 of this blog highlighted the recommendations for the installation of the many different SolmeteX amalgam separators on the market. Thank you for following us on this journey to learning how to read the User Manuals of the top six […]