Tag Archives: Amalgam Separators

Amalgam Separator User Manual Breakdown: SolmeteX Hg5® – Part 2 Inspection and Troubleshooting

Today we will be continuing part two of the SolmeteX brand of amalgam separators. Part 1 of this blog highlighted the recommendations for the installation of the many different SolmeteX amalgam separators on the market. Thank you for following us on this journey to learning how to read the User Manuals of the top six […]

Amalgam Separator User Manual Breakdown: SolmeteX Hg5® – Part 1 Installation

Today we will be reviewing the amalgam separator that is most offered by the bigger Service Companies in the United States of America, the SolmeteX Hg5®. Thank you for following us on this journey to learning how to read the User Manuals of the top six amalgam separators sold in North America. Our last segment […]

Amalgam Separator User Manual Breakdown: M.A.R.S LibertyBOSS

Thank you for following us on this journey to learning how to read the User Manuals of the top six amalgam separators sold in North America. Today’s blog series will be offering insight on how to understand an amalgam separator’s user manual and perform the tasks required to remain compliant. Part one of this blog […]

Amalgam Separator User Manual Breakdown – Introduction

Understanding the user manual of your amalgam separator is important. M.A.R.S Bio-Med knows that the topic of amalgam separators can be confusing to many Dental Professionals. There is a lot of information available on the subject, with very little authority to help sort through which data is the right one to follow. One section of […]

Commonly Asked Questions From Dental Industry Professionals

M.A.R.S often hears the same questions over and over from the Dental Industry. Many of these questions are formed by either getting incorrect information from the wrong source or getting the correct information from the right source and not understanding. M.A.R.S releases our weekly blogs with the hope of providing the right information that cannot […]

Journées Dentaires Internationales du Québec

MARS Envahit le Journées Dentaires Internationales du Québec

Another year is here for one of Canada’s top three Dental Conferences, the Journées Dentaires Internationales du Québec. M.A.R.S has always enjoyed attending this conference, as the President of M.A.R.S Bio-Med grew up in Montreal. Unfortunately, one of the most significant issues with growing as quickly as M.A.R.S has, we sometimes don’t have enough experts […]

Make an Informed Decision with the M.A.R.S Amalgam Separator User Manual Guide

M.A.R.S strives to be the beacon of information for the Dental Industry regarding the EPA Regulation, the user manual,  amalgam separators, and evacuation line cleaners. M.A.R.S finds those who make an informed decision about their compliance often chooses the best available technology in amalgam separations, the M.A.R.S LibertyBOSS. There are many different types of amalgam […]

evacuation line cleaner

The M.A.R.S Difference: Evacuation Line Cleaner

Today’s blog of this series will be speaking about one of the most accessible forms of preventative maintenance an office can do for their equipment, the use of the right evacuation line cleaner. This is the last blog of the M.A.R.S Difference series, learning how our well trained Trusted Distributors can save you money, keep you […]

The M.A.R.S Difference: Amalgam Separator Maintenance Part 2

Today’s blog is a continuation of our last blog on illustrating amalgam separator maintenance the importance of knowing the advantages, disadvantages, maintenance, inspections and failure points of each amalgam separator. Today we will be just focusing on one of the worse infractions committed by a non-M.A.R.S Certified Amalgam Separator Specialist. Below is the most recent […]

The M.A.R.S Difference: Amalgam Separator Maintenance Part 1

Thank you for following this Blog Series on The M.A.R.S Difference, highlighting the advantage of using a M.A.R.S Certified Technician and amalgam separator maintenance. Our last blog discussed how our Trusted Distributors could save your office by having the specialized training to keep your office compliant with your local regulations. Today, we will be illustrating […]

The M.A.R.S Difference: Certified Amalgam Separator Specialists

M.A.R.S Certified Amalgam Separator Specialists and Trusted Distributors take their training one step further than just a standard Technician. Our Distributors chose to receive the specialized training on local regulation compliance, amalgam separator maintenance, and proper use of evacuation line cleaners. Their training allows our Distributors to provide their clientele a higher level of service […]

NOW is the Time to Consider EPA Compliance – Part 3: Why Choose M.A.R.S?

Thank you for following this three-part Blog Series on when to consider becoming compliant with the EPA Regulation. If you are following this blog, you have most likely determined that you would want to inquire further about the EPA Compliance. Part One of this series focused on presenting you with how to determine your local […]

NOW is the Time to Consider EPA Compliance – Part 2: Being Informed

Thank you for following this Blog Series on the information required when considering EPA compliance. Our last blog spoke about who to contact when finding your local requirements. Today we will be outlining the questions and answers you need to make an informed decision on the amalgam separator that will suit the needs of your […]

The Training Sessions After the Pacific Dental Conference- Part 5

M.A.R.S’ journey training Patterson Dental Canada’s West Coast Branches ended in Calgary, with multiple training sessions, working with both Sales Representatives and Service Technicians. Our last blog spoke about the Calgary Branch’s management, Robert Czerwonka (Branch Manager), and Brad Unger (Service Manager). Today’s blog will be focusing on the time our Technical Specialist, Jason Buyukozer […]

training

The Training Sessions After the Pacific Dental Conference- Part 4

Today’s blog marks the end of M.A.R.S highlighting our fantastic experience with training Patterson Dental’s West Coast Branches. Our last two blogs discussed our journey with Patterson’s Vancouver Branch, as well as Patterson’s Edmonton Branch. Our Technical Specialist, Jason Buyukozer, had such a positive experience with the Edmonton and Vancouver Branches, he went into the […]

Required Procedures for LibertyBOSS Replacements, Returns and Warranty Registration Card

In an effort to clarify the installation of the M.A.R.S LibertyBOSS amalgam separator which includes procedures for completing the Warranty Registration Card, we would like to present the required steps: Removal/replacing the amalgam separator After installation of a new LibertyBOSS amalgam separator, seal the depleted separator with airtight plugs in the inlet and outlet (Teflon […]

The Training Sessions After the Pacific Dental Conference- Part 1

Never has M.A.R.S received such amazing and overwhelming support from our Trusted Distributors during the Pacific Dental Conference. Read our blog from last week, to learn more about the M.A.R.S experience at the PDC. Today’s blog was supposed to highlight the entire experience of our Technical Specialist, Jason Buyukozer, as he traveled across the West […]

Detailed Breakdown on the Proper Installation of an Amalgam Separator on a Dry-Vacuum Pump- Step 4- Planning

If you have been following this Blog Series, you have chosen to join us on the educational journey of the proper installation of an amalgam separator on a dry-vacuum system. Step 1- Location- Part 1 of this Blog Series spoke about where in the mechanical room you will locate the inlet pipe from chairs and determine […]

Detailed Breakdown on the Proper Installation of an Amalgam Separator on a Dry-Vacuum Pump Step 3- Fittings

This blog will discuss choosing the appropriate fittings to complete your installation. Thank you for following our Blog Series on the in-depth look at the proper installation of a M.A.R.S LibertyBOSS on a Dry-Vacuum system.   Step 1- Location Part 1 of this Blog Series spoke about where in the mechanical room you will locate the […]