Tag Archives: LibertyBOSS amalgam separator

Reviewing M.A.R.S’ EPA Regulation Flowchart – Compliant Amalgam Separators

Our blog series on the EPA Regulation Flowchart continues, breaking down the information you need to keep your office in compliance. So far, we have discussed; – Exemptions – Compliance Deadlines – Compliance Reports Today, we will be reviewing Compliant Amalgam Separators, what is expected and what you should know. Compliant Amalgam Separators There is […]

compliance reports

Reviewing M.A.R.S’ EPA Regulation Flowchart -“One-Time” Compliance Reports

Thank you for following us to Part Three of our blog series on Reviewing M.A.R.S’ EPA Regulation Flowchart. Our first two segments were on the Compliance Dates and Installation Deadlines. Today, we will be discussing Compliance Reports and the time frame in which you are required to submit and resubmit the forms to your regulators. […]

M.A.R.S’ Adventures through March – Holistic/Biological Dentistry Part 3

M.A.R.S is having an amazing time at the Holistic Dental Society Symposium and the International Academy of Oral Medicine & Toxicology Spring Meeting! There is only one day left at both conferences, today we will highlight the events of the first two days of both conferences, and speak about what to expect tomorrow.   International […]

M.A.R.S’ Adventures through March – Holistic/Biological Dentistry Part 2

Today, Kim and Jason are off to two Holistic and Biological Dental Societies. Being environmental, all members of the Holistic Dental Association and the International Academy of Oral Medicine & Toxicology already have an amalgam separator. M.A.R.S attends these conferences to support and help inform Dental Professionals how to save money on their amalgam separation […]

M.A.R.S’ Adventures through March – 2019 Thomas P. Hinman Dental Meeting Part 2

After the second day of our first year at Thomas P. Hinman Dental Meeting, all M.A.R.S can say it “what a Show!” The first two days were amazing, mostly because of our Trusted Distributors. The level of dedication and support our Trusted Distributors are providing Dental Professionals during the Hinman Dental Meeting is incredible. Though […]

M.A.R.S’ Adventures through March 2019 Thomas P. Hinman Dental Meeting Part 1

M.A.R.S will be invading the Hinman Dental Meeting for the first time this year! We are excited to send Kim Burns, Jason Buyukozer, and LB1 to Atlanta, for this amazing event! We cannot wait to help educate the Dental Professional of Georgia on the new Amalgam Separator Regulation, as well as assisting our Trusted Distributors […]

M.A.R.S’ Adventures through March – Trusted M.A.R.S Distributors Part 2

Today ends our adventure in the West Coast of Canada, and what an adventure. M.A.R.S appreciates our Trusted Distributors and the dedication they have to our company and products. Our last blog spoke about the first half of our journey after the Pacific Dental Conference. Today’s blog will speak about our time in Calgary. Patterson […]

Distributors

M.A.R.S’ Adventures through March – Trusted M.A.R.S Distributors Part 1

Every year after the Pacific Dental Conference, M.A.R.S spends the following week with our Trusted Distributors, offering education, and expertise to help their clients. We started our journey after the Pacific Dental Conference in Vancouver, then headed to Edmonton, Alberta to meet with Patterson Dental and Valuemed. Our Trusted Distributors Dental Fix – The Hartley […]

M.A.R.S’ Adventures through March – Pacific Dental Conference Part 2

Today concluded another successful year at the Pacific Dental Conference. M.A.R.S would like to thank our Trusted Distributors for their support. During the PDC, we were able to help many Dental Practices realize the benefit of upgrading their Dental Practice to the M.A.R.S LibertyBOSS amalgam separator. Pacific Dental Conference Patterson Dental – Booth 419 During […]

M.A.R.S’ Adventures through March – Pacific Dental Conference Part 1

During the month of March, M.A.R.S will be chronicling our amazing and exciting journey. The first adventure this month was the opportunity of being a guest speaker during the 35th Annual Industrial Waste & Pretreatment Conference in Charlottesville, Virginia. M.A.R.S was honoured when we were asked to supply our compliance expert, Jason Buyukozer, to help […]

Visit Trusted M.A.R.S Distributors at the Chicago Mid-Winter Dental Meeting

M.A.R.S will be splashing down in Chicago this afternoon, excited to support our Trusted M.A.R.S Distributors throughout the conference Chicago Mid-Winter meeting!   Read our blog to locate the booths of our Trusted M.A.R.S Distributors and learn about their Show Special on the LibertyBOSS amalgam separator! Chicago Mid-Winter Meeting Show Special M.A.R.S and our Trusted […]

Are You Getting the Service You Paid For? Proper Disposal of your Amalgam Separator

  We have reached the end of the blog series reviewing the responsibilities of a service technician and the Dental Staff when it comes to the compliance of an amalgam separator. The first few segments of this series broke down the compliance tasks that can be done by the dental staff and which tasks can […]

M.A.R.S’ Time with the Suffolk County Dental Society

Last week, M.A.R.S spent time in Ohio with both our Trusted Distributors and the Keely Dental Society. This week, M.A.R.S had the privilege to educate Dental Professionals on their EPA amalgam separator compliance once again. Because of the introduction made by Johnny Yuen of Dental Fix, the Suffolk County Dental Society had asked our Amalgam […]

M.A.R.S’ Journey through Ohio to the Keely Dental Society – Part 2 – Trusted Distributors and CE Course

As you may have read in Part 1 of this blog series, M.A.R.S had an amazing journey last week through Ohio, starting in Cleveland and ending in Cincinnati. Our last blog described how we were approached by the wonderful Dr. Mueller to share an understanding of EPA Compliance with the members of her Keely Dental […]

Are You Getting the Service You Paid For? Amalgam Separator Maintenance, Inspection, and Record-Keeping Part 2

Simply having an amalgam separator will not keep you compliant. Part 1 of the Maintenance, Inspection, and Record keeping portion of this blog series spoke about how your Service Technician cannot keep your office compliant when using a standard amalgam separator. Changing a filter when it is full is only the tip of the iceberg […]

Are You Getting the Service You Paid For? Amalgam Separator Maintenance, Inspection, and Record Keeping

It is a common misunderstanding of Dental Practices that their Service Professional is responsible for keeping the amalgam separator maintained and compliant. Unfortunately, even the best Service Technician cannot keep the average office compliant, not without costing the office hundreds of dollars per week. Many amalgam separators on the market are based on older filter […]

M.A.R.S Offers the Sad Truth about the Dangers of the False Upgrade Offer Part 3- A True Upgrade

M.A.R.S hopes the first two segments (The Dangers of the False Upgrade Offer and Behind the False Upgrade) of this blog series got Dental Professionals thinking about the commonly misused term of “Upgrade” in the Dental Industry. We are, in no way, saying that there are not honest companies offering better products and services. What […]

M.A.R.S Offers the Sad Truth about the Dangers of the False Upgrade Offer Part 2- Behind the False Upgrade

The marketing industry is one made of half-truths and whole lies. The first segment of this blog series spoke about an old filtered based amalgam separator manufacturer who had come across troubles when competitors created aftermarket filters to fit on their system. Today, we will be highlighting their “solution” to gain their clientele back. The […]

What you Need to Know to Comply with the EPA Dental Rule

On July 14th, 2017 the EPA Dental Rule (Regulation) was released, requiring Dental Practices to have an ISO 11143 amalgam separator, use of a non-oxidizing evacuation line cleaner with the pH range of 6-8, as well as properly disposal of the dental waste. The amalgam separator will need to be maintained to manufacturer’s specifications (i.e., […]